Envirotile Vented Roof Tile AnthraciteEnvirotile Vented Roof Tile Slate GreyEnvirotile Vented Roof Tile Dark BrownEnvirotile Vented Roof Tile Terracotta

Envirotile Lightweight Lowline Tile Vent

Lowline roof tile vent for use with Envirotiles.

Permits entry of air into the roof space for cross flow ventilation or for use with mechanical extraction

For roof ventilation: Conforms to the requirements of BS:5250 & BS:5534-2014 & the building regulations approved document F2:2010 & NHBC recommendations

  • For passive Stack ventilation: Conforms to BS:5925:1991 & building regulations approved document F1:2010
  • For use as a Soil vent application: Conforms to BS:12056-2:2000

Envirotile ventilated roof tile products comply with relevant British standard requirements & NHBC Regulations

  • Designed to be unobtrusive – the tile simply integrates with standard Envirotile
  • Supplied exclusive for Envirotile use in any of our dedicated colour range
  • 10,000 mm² free air flow
  • For roof installation above a pitch of 22.5⁰ degrees

Recommended spacing requirements for correct airflow of ventilation area of

  • 5 mm continuous opening – install at 2.0 m apart subject to pitch requirements
  • 10 mm continuous opening – install at 1.0 m

Airflow Resistance when used as an extract terminal

  • 10Pa 54m3/hr (15 litres /sec)
  • 42Pa 108m3/hr (30 litres/sec)
  • 162Pa 216m3/hr (60 litres/sec)

Envirotile Lowline Vent Tile

N.B.  Ventilation must comply to BS:5250-2002.  Ventilation methods vary and are determined by type of property and roof type applications.  If in doubt please request assistance from our Technical Team.

Envirotile Lowline Vent Tile

Anthracite: GSPLLV10/1
Slate Grey: GSPLLV10/2
Dark Brown: GSPLLV10/3
Terracotta: GSPLLV10/4

Envirotile Lowline Vent Tile

Available for use with these products:
STR110: Square to Round Pipe Adaptor 110mm
FHK112: Flexi Tube & Clips 112mm

Watch Dragon ball super